Supplying
used food processing machinery since 1952, with over six warehouses
of used food processing equipment IN STOCK!
ALARD
EQUIPMENT CORPORATION
6483
Lake Avenue
Williamson,
NY 14589 U.S.A.
315-589-4511(voice)
315-589-3871(fax)
WASHER / SCRUBBER / PEELER
for fruits and vegetables
FOUR ROLL stainless steel, continuous...
Click
on pictures to
"zoom in"... Click
on pictures to
"zoom in"...
A continuous four roll peeler-washer
which can be fitted with any combination of brushes and/or abrasive
rolls for peeling, brush washing, scrubbing, or finishing (e.g. in
combination with another peeler or steam peeler) of fruits and
vegetables such as potatoes, beets, carrots, onions, cucumbers,
pickles, apples, oranges and others.
OPERATION:
Raw product is continuously
fed to the
peeling chamber and subjected to the spinning rolls (abrasive and/or
brushes as the case may be). It is important that a sufficient amount
of product be kept in the peeling chamber during operation for
best results. Lubricating and rinsing action is provided in the
chamber by overhead sprays, while the flow of product through the
machine is regulated both by a weighted discharge door, and the
inclination of the machine.
FEATURES:
15 inch by 27 inch top hopper inlet
opening in the hinged stainless steel cover at 57 inch infeed height.
Lubricating and rinsing action is
provided in the chamber via a stainless steel water spray pipe header
with spray nozzles.
Peeled product discharges through a
stainless steel discharge flapper-gate which is adjustable so product
can be subjected to a longer or shorter peeler /washing exposure;
--at a 39 inch discharge height.
Water, peels and debris drop to a
full length stainless steel water catch pan with a 6 inch by 6 inch
center bottom outlet.
Capacities run in the ton-per-hour
range more or less, depending on product and application (peeling,
washing).
Shows in pictures with four (4)
abrasive rolls, each 6 inch diameter by 6 foot long; but can be set
with any combination of abrasive or brush rolls to buyer need /
specification for stronger or gentler peeler / scrubbing action.
The abrasive brush rolls are mounted
parallel (in-line) with product flow.
Complete with central lubrication
cluster for ease of maintenance.
Chain / sprocket drive powered by a
3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
We recommend an optional "soft
start" variable speed controller in a gasketed PVC NEMA 4
control box.
As of this
writing, ALARD EQUIPMENT has
this model available NEW in stock and available for immediate
shipment.
CALL 315-589-4511 to confirm
availability and discuss your particular fruit and/or vegetable
peeling and washing equipment need.
We won't share your Email
address or other
information with anyone, and we won't abuse your trust by sending
constant nagging messages.Our Email updates are no-more-than-monthly.
ALARD
EQUIPMENT CORPORATION 
